I was lucky that the wire that was grounding inside the solenoid was the one exiting the coil if it had been the one coming into the coil I would have had a direct short and burned something up. Solenoid costs about $150 by the time you get it shipped. I wrapped it with some Scotch 33 tape and slid it back in and recimped the end with a small ball pein hammer and works perfect now. I uncrimped the back end of mine and slid the solenoid coil out and found they had wrapped the coil with cloth tape to insulate where the wires are soldered on and the tape had disintergrated, letting the solder joint touch the metal case and ground it. Idle Blue Star 185 will run for about 12.8 hours of operation. 0.400 Welding at 130 amps (at 30 percent duty cycle), the. 0.600 power, the Blue Star 185 will run for about 7.5 hours. 0.800 Under a continuous load of 3,000 watts of generator.
#MILLER BLUESTAR 2E WELDER SPECS MANUAL#
He has the Ac-dc running but is only getting 35 volts at the ac plugs and just a sparkle when trying to weld. MILLER Blue Star 2, 2E, 2E ACDC TECHNICAL MANUAL Eff. The one that is complete is a 2e ac-dc and I believe the other one is a 2e. Mine had about 30 ohms between one wire and the case and when I bolted the solenoid to the machine it got 12 volts and would ground itself, keeping the solenoid pulled in and at weld speed anytime it was in the weld position. Hello all my nephew was given two blue star welders.
Ohm the two wires going into the solenoid and you should have about 3 ohms between them and nothing (infinity) between either wire and the case of the solenoid. Mine would never idle down in weld position and I thought it would be the idler board but it was actually the solenoid. When you flip it to weld it supplies 12 volts to the solenoid and then the idler board grounds the other wire coming from the solenoid to pull in the solenoid to make the machine go to weld speed. When you flip the power/weld switch to power it kills voltage to the idler solenoid and it will idle down like it's supposed to in power. Questions & Answers for: miller bluestar. Buy Miller Welder Parts online from Weldfabulous.
#MILLER BLUESTAR 2E WELDER SPECS GENERATOR#
Just went through this with my Bluestar 2E AC/DC. Miller Blue Star 2E AC/DC Arc Welding Generator - BigIron Auctions.
0 kommentar(er)
